Home > Led Testing Equipment >

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Product Categories

Electrical Appliance Testing Equipment [376]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [136]
Battery Testing Equipment [67]
Switch Life Tester [271]
Led Testing Equipment [71]
Water Ingress Testing Equipment [83]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Name: IEC 6059823 Static Load Test For PostTop Mounted Luminaires Testing Equipment
Brand: Sinuo
Price: 1 USD

Wholesale IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment from china suppliers

Brand Name : Sinuo

Model Number : SN9929

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : T/T

Supply Ability : 15 Sets per Month

Delivery Time : 30 days

Packaging Details : Plywood Case

Sandbag weight : 100kg/Bag

Control method : Automatic lifting

Test net naterial : Polyester fiber

Test net size : Diameter of 1mm

Net load capacity : 5～500 (KG)

Load weights type : Steel load set

Material : Polyester fiber

Warranty : Free warranty

Contact Now

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Product information:

This device meets the standards of IEC60598-2-3:2011 clause 3.6.3.1, figure 1 IEC60598-2-5 clause 5.6.5.

It used to detect the static load test of wind resistance for street lamps outdoors.

Test principle:

The working principle is to use a small sandbag to spread evenly on the road lamp under test, or use a net to cover the lamp, and then test the load on the net. This device is suitable for road lampshade wind-force test, equipped with sandbags, test nets, test weights, installation of test bracket, and etc.

Technical parameters:

Wind-force simulation sandbag	100kg/Bag, built-in steel ball (adjustable with various weights), two bags (small sandbags according to the test, 20 small bags with various specifications).
Control method	automatic lifting console operation
Test net	diameter of 1mm;load weight : 5～500 (KG);material: Polyester fiber; Convenient hook
Load weights	Steel load set, chrome plated surface
Equipment bracket	SUS304 stainless steel, can bear 300KG load, equipped with a variety of different street lights, tunnel light fixtures and street lamp holders, can be replaced.

Test According To Standard:

1. IEC60598-2-3:2011 clause 3.6.3.1 test

Calculate the load applied to the lamp according to the formula.

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Set test time 10min.

Press the start button to start the measurement, the disc on the right falls off the load and starts timing, and when the time is up, the disc rises to lift the load.

After the test is completed, there should be no visible damage that compromises safety, the permanent deformation of the attachment should not exceed a slope of 2 cm/m, and there should be no rotation around the attachment.

2. IEC60598-2-5 clause 5.6.5 test

For floodlights used above ground outdoors, a constant, evenly distributed load was applied to the floodlights for 10 minutes using sandbags, which provided a floodlight area of 2.4KN per square meter.

Set test time 10min.

Press the start button to start the measurement, the disc on the right falls off the load and starts timing, and when the time is up, the disc rises to lift the load.

Place the floodlight on a vertical plane, rotate 180° around the attachment point, and repeat the test.

During the test, there shall be no failure or movement in the vicinity of the connection point, and no permanent deformation of more than 1° after any part of the test.

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Product Tags:

Post-Top Mounted Luminaires Testing Equipment

IEC 60598-2-3 Luminaires Testing Equipment

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!